AB RUST®NFP is specifically designed to protect metal in contact with water based formulations.
AB RUST®NFP is a ready to use aqueous solution made of organic based corrosion inhibitors.
AB RUST®NFP is VOC* free, nitrite free and European Ecolabel* compliant.
The sustainable alternative with additives formulated from plant-based bases
AB RUST®NFP is mainly recommended for:
AB RUST®NFP must be added preferentially in the letdown, before the rheological agents. The use in post-addition is also a possible option. The use levels are:
There is no advantage to use higher levels. On the contrary, a too high dosage can increase the water sensitivity of the dry film.
Aspect: yellow liquid
Density: 1.02 – 1.12 at 20°C
pH: 7.9 – 8.5 at 20°C
Solubility: Water soluble in all proportions
AB RUST®NFP can release an odour specific to its composition, even in the dry film, for a prolonged period of time.
AB RUST®NFP is frost sensitive. It must be kept at temperature above 0°C. It is recommended to use AB RUST®NFP within 2 years following its manufacture (see the expiration date on the label).
AB RUST®NFP is classified in category 1 «Irreversible effects on the eye». For further information, please consult the MSDS.
AB RUST®NFP components are registered on the following inventories: EINECS (Europe), ENCS and ISHL (Japan), TCSI (Taiwan).
AB RUST®NFP is active on steels, galvanized steels, aluminum.
AB RUST®NFP formulation has been adapted in order to have every components listed on the TSCA (USA) and DSL/NDSL (Canada) inventories.
This version is available under the trade name AB RUST®NFP-C.
Polyethylene pails of 20 kg and 30 kg net
Metallic drums of 225 kg net
Polyethylene IBC of 1000 kg net
Non-returnable packages.
*VOC: volatile organic compounds defined by the Directive 2004/42/EC
*European Ecolabel: see Commission Decision 2014/312/EU