EMADOX®102 protects the water based formulations (coatings, paints and varnishes) from the flash-rust phenomenon observed during the application and drying stages.
EMADOX®102 is a ready to use aqueous solution made of several corrosion inhibitors.
EMADOX®102 is VOC* free, nitrite free and European Ecolabel* compliant.
EMADOX®102 is mainly recommended for:
EMADOX®102 must be added preferentially in the letdown, before the rheological agents. The use in post-addition is also a possible option. The use levels are:
There is no advantage to use higher levels. On the contrary, a too high dosage can increase the water sensitivity of the dry film.
Aspect: yellow to amber liquid
Density: 1.20 – 1.24 at 20°C
pH: 8.0 – 8.4 at 20°C
Solubility: water soluble in all proportions.
It is recommended to use EMADOX®102 within 2 years following its manufacture (see the expiration date on the label).
EMADOX®102 is classified according to the Regulation EC No. 1272/2008 [CLP].
H318 – Causes serious eye damage
For further information, please consult the MSDS.
EMADOX®102 components are registered on the following inventories: EINECS (Europe), TSCA (USA), DSL (Canada), IECSC (China), KECI (Korea) and TCSI (Taiwan).
EMADOX®102 is active on iron, cast iron, steels, aluminium, zinc, copper and its alloys.
Polyethylene pails of 10 kg, 20 kg and 35 kg net
Metallic drums of 250 kg net
Polyethylene IBC of 1200 kg net
Non-returnable packages.
*VOC: volatile organic compounds defined by the Directive 2004/42/EC
*European Ecolabel: see Commission Decision 2014/312/EU