EMADOX^® WR14

EMADOX®WR 14 is mainly recommended for:

• flash-rust protection of water based formulations based on acrylic, alkyd, epoxy polyurethane dispersions or emulsions.
• in-can protection for metal packaging filled with above products

EMADOX®WR 14 must be added preferentially in the letdown, before the rheological agents. The use in post-addition is also a possible option. The typical use levels are:

• 1.0 to 1.5% based on the total weight

There is no advantage to use higher levels. On the contrary, a too high dosage can increase the water sensitivity of the dry film.

Aspect: yellowish to amber liquid
Density: 1.16 – 1.22 at 20°C
pH: 9.0 – 10.0 at 20°C
Solubility: Water soluble in all proportions

EMADOX®WR 14 can release an odour specific to its composition, even in the dry film, for a prolonged period of time.

It is recommended to use EMADOX®WR 14 within 2 years following its manufacture (see the expiration date on the label).

EMADOX®WR 14 is classified according to the Regulation EC No. 1272/2008 [CLP].
H314 – Causes severe skin burns and eye damage
H335 – May cause respiratory irritation
For further information, please consult the MSDS

EMADOX® WR 14 components are registered on the following inventories: EINECS (Europe), TSCA (USA), DSL (Canada), AICS (Australie), IECS (China), ENCS and ISHL (Japan), KECI (Korea), PICCS (Philippines) and TCSI (Taiwan).

EMADOX®WR 14 is active on steels, aluminum.
EMADOX®WR 14 is a corrosion inhibitor used for verdigris prevention.
EMADOX®WR 14 contains a substance classified H412.

At the normal use levels, EMADOX®WR 14 complies with the concentration limit expressly derogated for H412 in the Appendix of the Commission Decision 2014/312/EU establishing the ecological criteria for the award of the EU Ecolabel for indoor and outdoor paints and varnishes.

Polyethylene pails of 20 kg and 30 kg net
Metallic drums of 225 kg net
Polyethylene IBC of 1100 kg net
Non-returnable packages.