Liquid corrosion inhibitor
Ready to use
Free from toxic substances or substances under regulatory restrictions (candidate list, REACH Annexes XIV and XVII) :
nitrite free, borate free, phosphate free
EMARUST® LCI-1
New product
Applications - Dosage
Solubility of the EMARUST® LCI-1 in solvents of very different natures opens up many possibilities :
- oil based or water soluble lubricants
- metal working fluids
DOSAGE ACCORDING TO THE USE
- lubricants and metal working fluids : from 0.5 to 2% based on the total weight
EMARUST® LCI-1 can release an odour specific to its composition, even in the dry film, for a prolonged period of time.
From one batch to another, or when ageing, EMARUST® LCI-1 colour can become darker. This change does not affect the product’s properties.
Characteristics
Aspect : colorless to yellow liquid
Density : 0.93 – 0.97 at 20°C
pH: 7.0 – 9.0 at 20°C
Solubility : soluble in water, in oxygenated solvents (alcohols, glycols, acetone, ethers) ; soluble in white spirit
Storage - Shelf-life
Store EMARUST® LCI-1 in its original packaging tightly closed.
It is recommended to use EMARUST® LCI-1 within the the label).
Labeling
EMARUST® LCI-1 is classified according to the Regulation
EC N°1272/2008 [CLP] :
H314 – Skin corrosion / irritation, Category 1B
H400 – Hazardous to the aquatic environment, Acute Category 1
H411 – Hazardous to the aquatic environment, Chronic Category 2
For further information, please consult the MSDS.
Regulatory information
EMARUST® LCI-1 components are registered on the following inventories : EINECS (Europe), TSCA (USA), DSL (Canada), AICS (Australia), NZIOC (New Zealand), KECI (South Korea), IECS (China), TCSI (Taiwan), TECI (Thailand).
Comments
EMARUST® LCI-1 is active on steels, aluminum, copper and its alloys.
It contains 80%w/w VOC : volatile organic compounds defined by the Directive 2004/42/EC
Packagings
EMARUST® LCI-1 is active on steels, aluminum, copper and its alloys.
It contains 80%w/w VOC : volatile organic compounds defined by the Directive 2004/42/EC