AB RUST® NFC

• AB RUST®NFC is specifically designed to protect metal in contact with water based formulations. 

• AB RUST®NFC is a ready to use aqueous solution made of organic based corrosion inhibitors. 

• AB RUST®NFC is VOC* free, nitrite free and European Ecolabel* compliant. 

 AB RUST®NFC is able to resist at temperature below 0°C. The solidification point is less than -15°C. 

It is recommended to use AB RUST®NFC within 2 years following its manufacture (see the expiration date on the label). 

•  AB RUST®NFC is mainly recommended for: 

  • flash-rust protection of water based anticorrosive primers, paints and varnishes based on acrylic, styrene-acrylic, alkyd, epoxy, polyurethane dispersions or emulsions 

  • in-can protection for metal packaging filled with above products 

    AB RUST®NFC must be added preferentially in the letdown, before the rheological agents. 

    The use in post-addition is also a possible option. 

 The use levels are: 

• typically, from 0.5 to 1% based on the total weight
• exceptionally, for sensitive metal substrates, 1.5 to 2% based on the total weight 

There is no advantage to use higher levels. On the contrary, a too high dosage can increase the water sensitivity of the dry film.