EMADOX®ICP protects the water based formulations (glues, coatings, paints…) from the flash-rust phenomenon observed during the application and drying stages.
EMADOX®ICP is a ready to use aqueous solution combining several corrosion inhibitors.
EMADOX®ICP is VOC* free, nitrite free and European Ecolabel* compliant.
The sustainable alternative with additives formulated from plant-based bases
EMADOX®ICP is mainly recommended for:
EMADOX®ICP must be added preferentially in the letdown, before the rheological agents. The use in post-addition is also a possible option. The use levels are:
There is no advantage to use higher levels. On the contrary, a too high dosage can increase the water sensitivity of the dry film.
Aspect: yellow liquid
Density: 1.05 – 1.15 at 20°C
pH: 8.0 – 9.0 at 20°C
Solubility: Water soluble in all proportions
EMADOX®ICP can release an odour specific to its composition, even in the dry film, for a prolonged period of time.
EMADOX®ICP is frost sensitive. It must be kept at temperature above 0°C.
It is recommended to use EMADOX®ICP within 2 years following its manufacture (see the expiration date on the label).
EMADOX®ICP is classified in category 2 «Irritating to eyes». For further information, please consult the MSDS.
EMADOX® ICP components are registered on the following inventories: EINECS (Europe), ENCS and ISHL (Japan), TCSI (Taiwan).
EMADOX®ICP is active on steels, galvanized steels, aluminum.
EMADOX®ICP formulation has been adapted in order to have every components listed on the TSCA (USA) and DSL/NDSL (Canada) inventories.
This version is available under the trade name EMADOX®ICP-C.
Polyethylene pails of 20 kg and 30 kg net
Metallic drums of 225 kg net
Polyethylene IBC of 1100 kg net
Non-returnable packages.
*VOC: volatile organic compounds defined by the Directive 2004/42/EC
*European Ecolabel: see Commission Decision 2014/312/EU